News
Contact Us
93# of 1st Building, 66# Jianshe Road, Zhengzhou, P.R.C.
Call Us:
86-371-6785 5108

FAQ of Flat Grinding Wheel & Solutions

Reasons of uneven surface of the work piece and solution:

Overfeeding: reduce feeding speed, especially at fine polishing speed;

Burning of work piece: try to use suitable grit and hardness

Remaining inner tense of work piece: eliminate inner strength before fine grinding

Smudgy electromagnetic clamp: clean electromagnetic clamp before fine grinding

Imposition of grinding wheel spindle: readjust the spindle and make it parallel with the working table.

Reasons of scratch on the surface of the work piece and solution:

Unclean cooling fuel: clean cooling sink or change cooling fuel

Soft grinding wheel: change to hard grinding wheel

Coarse grit: change to suitable grit

Dressing: check dressing equipment

Reasons chatter mark and solutions:

Main spindle wearing: check main spindle

Wobbling of grinding wheel: re-dressing of the grinding wheel and re-install

Grinding wheel is too hard: change to soft grinding wheel